Five most common washing machine problems and Fixing

With the first invention of the washing machine in the 1850s century, man has continued defiling all odds and continued to evolve from hard manual labor to machines that do work easily using high technology. The automatic machine came in up tune time in 1937, subsequently freeing many women from the hectic household chore. This invention has continued being embraced all over the globe as it is significantly automated to wash and dry clothes in a spur of 8-10 mins.

The machine involves one to have the following to function effectively

Adequate water

Adequate power source

Laundry detergent

Drain hose

Adequate water

Water is an important aspect to consider while thinking of a washing machine. Both front and top loaders have been tested and proved that with water problems the machine would not be able to clean the clothes hence may come out dirty or worse with terrible stains.

Front-loaders have been known to be the best water-efficient machine so far. Hence a lot of the users prefer the machine to the latter. In today’s machines, you could choose from adding the water from outside sources to adjust the machine set to automatically increase the amount of water-based on the weight of the load.

Adequate power source

Power in the machine ignites life to it; hence is a very important aspect to operate it. Modern washing machines have been designed to save the user’s electricity bill. Two factors determine the machines power consumption;

The electric motor-The motor is responsible for spinning the drum; hence proper clothes rotation.

The washing machine heater-This aspect heats water for cleaning

The electric motor consumes approximately 30% of the total power while the heater consumes 70%. If you have been wondering why your electricity bill has been sky rocking, then you have your answer. If you don’t have to heat water for your laundry, don’t.

Laundry detergent

Using standard detergent for your laundry in a highly efficient machine might gradually damage your machine. In addition, this standard-rated detergent could be the reason why your clothes are not getting clean by creating excess froth.

Laundry detergent comes in Liquid, solid, and even tablet forms. If not careful in using a proper detergent on your machine, you could damage your washing machine’s sensor to control the water level in the unit.

Draining Hose

To ensure your machines run smoothly, a proper drainage hose must be put in place correctly and firmly. If one is not good at plumbing, you might want to invite a specialist to help you out.

There are two common ways of connecting a washing machine drainage hose;

Slop sink connection-this is an easier and faster way of connecting the hose is directly connected to the wash basis hence hungover from one of the sides to create an air gap that prevents backflow of water back the washing machine

A dedicated drain pipe is the most ideal and recommended way of connecting a drainage hose. The drain pipe is purposely designed to handle any volume of water drained from a washing machine

Below we will be addressing the five most common washing machine problems asked;

Why is my washing machine too noisy while washing?

There are a couple of reasons why your washing machine could be noisy while doing your laundry, but the major reason might be the machine’s motor.

 An internal fault such as the motor might result from such noise. Therefore, you need to switch off the machine and call a technician.

Another reason your washing machine could be noisy is a coin spinning all around. A quick fix to this is switching off the machine and removing the laundry one by one till you take off the coin.

Why is my drainage hose not draining water from my washing machine?

The most common reason why your machine won’t drain water is that it has a blockage probably in the filter. The filter is responsible for collecting all debris from your laundry hence may clog and cause drainage issues.

A quick fix to this problem is simply checking the filter then unblocking any debris. After doing that, your washing machine will be able to drain water normally.

Why are my clothes coming out ripped and ruined?

This is because you did not place your clothes properly in the washer; hence when spinning, they were caught up in the center pole and ripped. To fix this problem never to occur again, it is necessary to take your time and ensure that you have correctly aligned your laundry in the washer.

Another reason that may lead to ripped clothes is an internal malfunction of your washing machine. Contact a qualified technician to resolve the malfunction.

Why is my washing machine not spinning?

There are two major reasons why a washing machine may fail to spin laundry. First, when the motor is the fault and not working, it may result in the washing machine not doing its solemn role – spinning. For this problem, a verified and qualified technician comes in handy to change the machine’s motor.

The other reason is when the machine is filled with the laundry to the brim; hence the machine lacks the power to rotate the entire heap. This problem can be resolved by reducing the number of clothes in the washing machine.

Why won’t my washing machine door open?

The reason why the washing machine door may not open is that the machine still has water. It has not drained. This might happen when the outlet hose is clogged hence draining slowly. One solution to this is to give it some time to drain all the water, or you could spin the washing machine one more time and give the water one more push. Both of the above solutions should gauge how fast you want to finish the laundry.

Leave a Comment

Your email address will not be published. Required fields are marked *